GWM Cannon PHEV Ute Is Coming: How to Accessorise Australia's Newest Plug-In Ute
CarMoods TeamAustralia's ute wars just got a new front. GWM has detailed its Cannon Hi4-T plug-in hybrid, a dual-cab confirmed to land here towards the end of the third quarter of 2026 and shaping up to be the country's most affordable PHEV ute, expected to start from under $50,000.
On paper it is a serious thing. A turbocharged 2.0-litre four-cylinder pairs with a front electric motor for total system outputs of 310kW and 750Nm, a 0-100km/h sprint of 6.1 seconds, a 33.1kWh lithium iron phosphate battery, around 84km of WLTC electric-only range and a 3500kg braked-towing rating.
That puts it squarely in the sights of the BYD Shark 6 and Ford Ranger PHEV, and it slots neatly under GWM's larger Cannon Alpha PHEV. If you are eyeing one of these new-generation plug-in utes, the way you kit it out matters just as much as the badge. Below is a practical guide to the accessories that earn their place, with a look through our GWM and BYD ranges.
Jump to: Why a PHEV ute is different · Comfort for long hauls · Power for work and play · Protecting a working ute · FAQ
Why a PHEV ute is different
A plug-in ute is two vehicles in one: a quiet daily commuter on battery power, and a torque-rich tow rig when the tank kicks in. That dual life changes what you carry.
You are now managing a charging cable as well as a fuel cap, running errands in near silence, then loading up for the weekend. The right accessories bridge those two worlds so neither one feels like a compromise.
Start with the touchpoints you use every single drive, then build out from there.
Comfort for the long hauls
Utes rack up big kilometres, and a rugged cabin can be a hard place to spend hours. The steering wheel is where every drive begins, so it is worth getting right.
A snug cover adds grip on cold mornings and hot afternoons, protects the factory rim, and lifts the whole cabin. GWM's Tank family shares its interior architecture with the Cannon range, so a Tank-fit cover is a natural match.
Editor's Choice
GWM Tank Suede Carbon Fiber Leather Steering Wheel Cover
Suede and carbon-look leather for a firm, all-weather grip that suits a hard-working GWM cabin.
Shop nowLong tows and road trips also take a toll on your neck and lower back. A matched headrest and lumbar set keeps your posture honest when the kilometres stack up, and there are brand-fit options for both new utes on the block.
Recommended
GWM Tank Neck Pillow & Lumbar Support Cushion
Cradles your neck and lower back on long tows so you arrive fresher, not stiffer.
Shop now
Bestseller
BYD Leather Car Neck Pillow Headrest Cushion
A tidy leather headrest cushion that matches a BYD cabin and softens the daily commute.
Shop nowBrowse the full neck pillow & lumbar support range if you want to compare fits across brands.
Power for work and play
The headline trick of a modern plug-in ute is vehicle-to-load: the ability to run tools, lights or a campsite fridge straight from the battery. To use it properly, you want the right adapter on hand.
A local-socket V2L adapter turns your ute into a mobile power point, which is gold on a job site or a weekend away. Ours suits BYD and other compatible EVs on the Australian plug standard.
Staff Pick
Type 2 V2L Discharger 16A Australia Socket Adapter BYD Geely Xpeng
Run tools, lights or a fridge from your battery with a proper Australian-socket V2L adapter.
Shop nowPlug-in ownership also means living with a charging cable. Left loose in the tub or boot it gets grubby fast, so a waterproof storage bag keeps it clean, coiled and easy to find.
Recommended
BYD Electric Vehicle Charging Cable Storage Bag Waterproof Organizer
Keeps your charging cable clean, coiled and out of the way between top-ups.
Shop nowPro tip
Store your V2L adapter and charging cable together in the same waterproof bag. When you reach for one, you have the other — no more hunting through the tub before a campsite cook-up.
Protecting a ute that actually works
Utes live harder lives than most cars: car parks, worksites, kids and gear all leave their mark. A little protection early saves the paint and trim you paid for.
Door edges are the first casualty in tight tradie car parks. A slim silicone anti-collision pad along the door edge takes the knocks so your panels do not.
Recommended
GWM Car Door Anti Collision Silicone Pad For Great Wall Tank
Shields door edges from dings in tight car parks and busy worksites.
Shop nowAnd because ute life often means loading up in the rain, a full-size auto umbrella that lives behind the seat is one of those small buys you never regret.
Staff Pick
GWM Branded Fully Automatic Umbrella
A one-press auto umbrella that stows behind the seat for wet load-ups and site days.
Shop nowOur top picks
- 🥇 Type 2 V2L Discharger 16A Australia Socket Adapter Best for PHEV owners Shop →
- 🥈 GWM Tank Suede Carbon Fiber Leather Steering Wheel Cover Editor's Choice Shop →
- 🥉 GWM Tank Neck Pillow & Lumbar Support Cushion Comfort buy Shop →
Kit it out before it lands
Whether you end up in a GWM Cannon PHEV, a BYD Shark 6 or a Ranger PHEV, the smart move is the same: sort the touchpoints, the power gear and a little protection before the novelty wears off.
Do it early and your new plug-in ute feels finished from day one. Explore our GWM, BYD and travel & road trip essentials ranges to build your kit.
Frequently Asked Questions
When does the GWM Cannon Hi4-T PHEV arrive in Australia?
GWM has detailed the Cannon Hi4-T plug-in hybrid for a launch towards the end of the third quarter of 2026, positioning it as a rival to the BYD Shark 6 and Ford Ranger PHEV.
Is the GWM Cannon PHEV a rival to the BYD Shark 6?
Yes. It is expected to undercut the Shark 6 on price and slots beneath GWM's larger Cannon Alpha PHEV, making it one of Australia's most affordable plug-in utes.
What is V2L and why does it matter on a PHEV ute?
Vehicle-to-load lets you draw mains-style power from the ute's battery to run tools, lights or a fridge. A local-socket V2L adapter is what makes that practical on a job site or campsite.
Will GWM Tank accessories fit the Cannon range?
Many interior touchpoint accessories such as steering wheel covers and neck pillows share fitment across GWM's Tank and Cannon cabins, but always check the product listing for your exact model before buying.
